Return to Mushroom Climate's Site Index
AS310e Standard Factory Model
AS310e Portable for use with battery power
AS310e High Humidity Model
DIY relay co2 controller for 1/3 hp fan, using off-the-shelf parts.
How to Adjust AS310e's Analog Output Signal
How to use AS310e to control a damper
Fan speed control with AS310e's analog output
PayPal
Online catalog
How To Adjust As310e's Relay "setpoint"
set AS310e has control relay (contacts rated 24Vac, 2amp) which can be set to open or close at any co2 level, from 0-5,000ppm.

Remove cover and locate JP1-JP5 in the upper left corner of the pcb.

Move the shorting block from JP5 to JP3. The LCD will show the relay setpoint.

Push the UP or DOWN button to adjust the reading.

Return the jumper to JP5.

Placing the shorting block over both pins of JP5 causes the relay contacts to close as co2 rises. In greenhouses, for controling addition of co2, store the shorting block over only one pin of JP5 and the relay will open as co2 rises.

How to Connect a Power Relay to AS310e wiring diagram
Mushroom Climate offers five models of RIB Relays!
This is a UL Listed, Class II, 24Vac Control Transformer.

It has a single hub where all wires come out and can be easily mounted on any standard device box (handi-box) through a 1/2 inch conduit knock-out.


TR40VA015 is rated 40VA for 120, 208, and 240 input $12.12 with AS310e purchase
List Price: $17.83, buy it for $15.86

Choose one of these RIB Relays.

Much more than just a relay, RIB Relays make installation a snap, because everything is included inside one box. If you bought the parts separately, you would need to buy:

  • enclosure w/conduit nipple
  • relay
  • socket for relay
  • LED function indicator
  • 3-position switch (on-off-automatic) This is a true mechanical switch that works even if there is no control power to the relay.
#1 RIB U1S
RIBU1S Relay RIBU1S diagram Controls one fan up to 1/3 HP
Incudes housing with 1.25cm (1/2 inch) conduit nipple, LED function indicator, and 3-way switch. You can manually switch the fan "on-off", or, set it on "automatic" and let AS310e control the fan.
SPST contacts rated 10 amp; UL listed for 120/240Vac motors up to 1/3 HP; coil input 10-30Vdc 18mA, 10-30Vac 50mA, 120Vac 25mA
$18.30 with AS310e purchase
List price $32.54
#2 RIBU2S2
RIBU2S2 Relay RIBU2S2 diagram Controls two fans up to 1/3HP
Incudes housing with 1.25cm (1/2 inch) conduit nipple, two LED function indicators, and two 3-way switches. You can manually switch either fan "on-off", or, set them on "automatic" and let AS310e control the fan.

Two SPST relays, each rated 10 amp; UL listed for two 120/240Vac motors up to 1/3 HP; coil input 10-30Vdc 18mA, 10-30Vac 50mA, 120Vac 25mA

$32.40 with AS310e purchase
List price $51.84, buy it for $46.65
#3 RIB2401SB
RIB2401SB Relay RIBU2S2 diagram Controls one fan up to 2HP
Incudes housing with 1.25cm (1/2 inch) conduit nipple, LED function indicator, and 3-way switch. You can manually switch the fan "on-off", or, set it on "automatic" and let AS310e control the fan.

One SPST relay, contacts rated 20 amp; UL listed for one 120Vac motor up to 1HP, or one 240Vac motor up to 2HP; coil input 10-30Vdc 18mA, 10-30Vac 50mA, 120Vac 25mA

$24.48 with AS310e purchase
List price, $43.54, buy it for $39.18
#4 RIBUS2
RIB24S2 Relay RIBU2S2 diagram Controls two fans up to 2HP
Incudes housing with 1.25cm (1/2 inch) conduit nipple, one LED function indicator, and one 3-way DPST switch. You can manually switch both fans "on-off", or, set the switch on "automatic" and let AS310e control the fans.

One DPST relay, contacts rated 20 amp resistive load; each set of contacts UL listed for 1hp 120Vac or 2hp 240Vac; coil input 10-30Vdc 18mA, 10-30Vac 50mA, 120Vac 25mA

$37.72 with with AS310e purchase
List price, $67.06, buy it for $60.35
#5 RIBU1C
RIBU1C Relay RIBU1C diagram Turns one thing on - turns one thing off
Incudes housing with 1.25cm (1/2 inch) conduit nipple, LED function indicator. DPST contacts simultaneously turn on one 120/240Vac fan up to 1/3HP or resistive load up to 277Vac 10amp, and at the same time turn off one fan 120/240Vac up to 1/6HP or a resistive load up to 10amp

One SPST relay, rated 10 amp resistive load; UL listed for starting one 120/240Vac motor up to 1/3 HP and simultaneously stopping one 120/240Vac motor up to 1/6HP; coil input 10-30Vdc 18mA, 10-30Vac 50mA, 120Vac 25mA
Use in greenhouses to open solenoid valve from co2 supply and at the same time turn off the exhaust fan.
$12.78 with AS310e purchase
List price, 22.71, buy it for $20.43


Questions? You can contact us using English language: email.

Questions? You can contact us using Russian language: email.

You can order from our online catalog.

Mushroom Climate accepts payment by VISA and MasterCard and we won't charge your credit card until your order ships. You can also pay with Western Union Money Transfer, ask for details by email.

Shipping by UPS, USPS Priority mail, USPS Standard International Air Mail, or USPS Global Express Mail.


Return to Mushroom Climate's Site Index
AS310e Standard Factory Model
AS310e Portable for use with battery power
AS310e High Humidity Model
DIY relay co2 controller for 1/3 hp fan, using off-the-shelf parts.
How to Adjust AS310e's Analog Output Signal
How to use AS310e to control a damper
Fan speed control with AS310e's analog output
PayPal
online catalog